Supported Transceiver Modules
The table below provides details of the SFP transceivers available from Progress, all modules listed are TAA and MSA compliant.
| Max Supported Speed (Gbps) | Media | Cable Type | Transceiver | Kemp Part Number |
|---|---|---|---|---|
| 1 | Copper | Cat-5e/Cat-6 – RJ45 | 1Gb SFP Copper, up to 100m (10/100/1000BASE) | LM-SFP-RJ45 |
| 10 | Fiber | Multi-mode Fiber | 10Gb SFP+ SR Optic, 850nm, up to 300m (10GBASE-SR) | LM-SFP-SR |
| 10 | Fiber | Single-mode Fiber | 10Gb SFP+ LR Optic, 1310nm, up to 10km (10GBASE-LR) | LM-SFP-LR |
| 10 | Copper | SFP+ to SFP+ Direct Attach Cable (DAC). Passive Twinax | 10GBASE Copper SFP+ to SFP+ | LM-SFP-DAC-1M (1m cable) LM-SFP-DAC-3M (3m cable) LM-SFP-DAC-5M (5m cable) |
| 25 | Fiber | Multi-mode Fiber | 25GBase-SR SFP28, 850nm, up to 100m | LM-SFP28-25G-SR |
| 40 | Fiber | Multi-mode Fiber | 40GBase-SR4 QSFP+, 850nm, up to 150m | LM-QSFP-40G-SR |
| 100 | Fiber | Multi-mode Fiber | 100GBase-SR4 QSFP28, 850nm, up to 100m | LM-QSFP28-100G-SR |
- The above transceivers are supported on the following Kemp hardware LoadMasters:
- LM-X15-NG
- LM-X25-NG and LM-X25MT-NG
- LM-X40-NG
- LM-XHC55-NG, LM-XHC75-NG and LM-XHC100-NG
- The network interface configuration of each of these models can be found in the LoadMaster Hardware Datasheet
- All of the above transceivers have been tested and certified by Progress
